We develop

mycelium

products.

Get to know us.

About Biomyc Ltd.

We develop and make mycelium composite parts that replace plastic foam.

Biomyc Ltd. is a Bulgarian company that develops products from mycelium composite: plant fibre bound by mycelium and grown in a mould to near-net shape. We have worked with this one material for more than seven years and developed over 50 products and packaging solutions.

Most of our work is for corporate R&D teams in automotive, packaging and industry. We take a part through feasibility, product development, prototyping and testing, and a pilot run. We also make gift packaging, display pieces and art pieces for premium brands.

We make custom moulds for every part and test against named standards. You get real parts and real data before you decide to scale, and we handle short runs and larger series.

Supported by

EIT Food Accelerator NetworkEIT FoodCo-funded by the European Union

Services

What we work on.

Parts for automotive and industry

Mycelium composite parts that replace plastic foam: concept car interior parts, protective inserts and single-use parts on the production line.

Protective packaging

Moulded inserts and corner pieces that take the place of EPS and PU foam. Our automotive headlamp pack passed ISTA 3E in a Tier-1 pilot.

Material research

We test new fibres, production waste, additives and coatings in the material. One example: lavender and rose waste with the University of Food Technologies.

Pieces for premium brands

Gift packaging, display pieces and art pieces, finished with coatings from our library of more than 160 tested options.

Eco Packaging Design

We design a unique packaging solution for your premium product with mycelium composite and/or renewable/ sustainable materials.

Additional Graphics and Elements

We create the necessary digital and/ or printed design assets for your product to flesh out the idea.

Project Management

When the technical drawings are ready we connect you with licensed producers and offer a project management service so you get the ready-made products hassle-free.

Why work with us?

What you get with us:

Proven

Seven years with one material.

More than 50 products and packaging solutions developed for corporate R&D teams and premium brands.

Tested

Data you can check.

Every value we publish comes from a named test standard: EN 826, EN 1602, EN 12667, EN ISO 29767, OECD 301F and ISTA 3E.

Scalable

Short runs and larger series.

Custom moulds for every part. Start with a handful of prototypes and scale when the part is proven.

Finished

More than 160 tested coatings.

Sealed, coloured or metal-look surfaces for parts that people see and touch.

Partners & Clients

We are proud to have worked with these amazing companies.

Awards and honors.

Or what we can show for our efforts.

Grant Winner - Norway Grants
Innovation
2022
Circular Valley Accelerator Laureate
Business
2022
MUSE Awards Gold Medal for Luxury Product & Packaging Design
Design
2021
INVIVO Quest Europe - European Regional Winner
Business
2020
Chivas Ventures - Local Finalist - Bulgaria
Business
2020
Forbes 30 under 30 Award for a Biomyc Founder
Innovation
2020
Plug & Play Startup Autobahn - Selected from a 1000 startups to do a pilot project with Mercedes-Benz
Design
2019
EIT Climate KIC Accelerator Stage lll Laureate
Innovation
2019
EIT Top 30 Cleantech Startups Nomination
Business
2018
Green for Growth Clim@ Competition Winner
Business
2018
Startup Europe Awards - Green Category - Winner
Innovation
2018
EIT Climate KIC Accelerator Stage ll Laureate
Business
2018

Our Process.

Proven through work with industry leading companies.

01

Research & Development

Feasibility | Spec | Cost

It starts with your part and a straight answer

We start with a short call about your part, your spec, your volumes and your target cost, under NDA if you need one. Then we test the material and coating options against your requirements and tell you straight whether mycelium composite can do the job, and what it would take.

  • Intro call and NDA
  • Spec and target cost review
  • Material and coating options
  • Feasibility tests
  • Go or no-go with reasons

02

Product development

Shape | Mould | Coating

We design the part around the material

Mycelium composite has its own rules: a minimum molded thickness of 15 mm and a general tolerance of ±2 mm, depending on the geometry. We adapt your part to them, design the mould and pick a coating from our library of 160+ tested coatings. Every choice is checked against the price the part has to hit.

  • Design for mycelium composite
  • CAD and mould design
  • Coating selection
  • Cost per part
  • Design freeze

03

Prototyping and testing

Prototypes | Transit | Data

Real parts in the real shape and size

First samples take about 1 to 2 weeks from the start of growing. We make prototypes in the real shape and size and run the tests your part has to pass, such as transit, drop, humidity and fit checks. You get the data, plus samples to run your own tests.

  • Prototype moulds
  • Prototype runs
  • Transit and lab tests
  • Test report
  • Samples for your own tests

04

Pilot production

Pilot run | Your line | Scale-up

Proof on your own line before you scale

We run a pilot series so you can check the part on your own line, with your suppliers and with your customers. We hand over a spec your production partners can use and plan the scale-up around your volumes.

  • Pilot series
  • Trials on your line
  • Quality checks
  • Production spec handover
  • Scale-up plan

Core Team.

Who we are.

Atanas Enev
Manager & Design Lead

Atanas is an architect, designer, and entrepreneur with experience in managing complex multi-stakeholder projects and developing innovative products from renewable materials. He was named one of Forbes Bulgaria’s 30 under 30 most influential people that drive innovation and progress. He is responsible for strategic planning, design, and customer acquisition in the team.

Vanya Milanova
Marketing & Customer Dev

Vanya has more than 10 years of experience in management, marketing, and customer development. She has successfully led international projects with various stakeholders across Europe as a project manager with one of the leading companies in the education sector and developed foreign markets & managed key client accounts as part of a successful scale-up in the health and science sector. Her main responsibilities are customer development and marketing.

Prof. Albert Krastanov
Research Lead

Albert is one of the leading experts in the field of Biotechnology in Bulgaria. He has over +30 years of experience and approximately +200 publications, many patents, and books. He has worked on a number of large industrially oriented projects for large international corporations such as EADS, HUVEPHARMA, and SELUR. Albert is the lead scientist in charge of technological development and testing.

Media.

How we do the things we do.

Have a part in mind?

Get in touch

Prefer to talk

A short online call about your part, your requirements and your timeline. You leave knowing whether mycelium composite fits and what the next step would be.

Prefer to write

Answer a few short questions about your part and your project. We reply in writing with our view and the next steps.